AirPatrol WiFi is not connecting
This guide covers the connection between AirPatrol WiFi and your WiFi network.
If the device used to work or you have changed networks
Check that your WiFi network has internet access and that you have the correct WiFi name and password. If you have changed your router or network details, or the device keeps losing connection, tell support what changed and whether the controller is still shown in the app.
If you see a message that the controller is already registered, or you are unsure how to reconnect it, contact support before deleting the controller or creating a new account.
If you need to repeat setup
- Reset the AirPatrol device. Press and hold the Test and Pairing buttons together until the Power light starts blinking.
- Start a new installation in the app. Follow the on-screen instructions. When asked to press the Pairing button, press it briefly once. The Pairing light should stay on steadily. See also Pairing LED light is blinking.
- If automatic pairing fails: select Manual pairing in the app. Open your phone's WiFi settings, connect to the temporary AirPatrol WiFi network, then return to the app to complete setup.
If pairing still fails
You can try temporarily turning off your router's 5 GHz WiFi band during setup. Leave 2.4 GHz enabled and connect your phone to that network before starting setup again. Once setup is complete, you can turn 5 GHz back on.
Only make this change if you know how to turn the band back on; other devices using 5 GHz may lose their connection while it is off.
This is an additional troubleshooting step that may help on some networks; it is not always necessary. This change concerns your router's WiFi band, not the 5G mobile network.
If it still does not work, contact support. Include your AirPatrol model, phone model and operating system, router model and the step that fails. If possible, attach the error message or a photo of the LED status. Do not send your WiFi password.