The outdoor temperature is missing from the Tune app
Open Settings → Ngenic Tune and check whether the gateway and control box are connected. If either is offline, start with the connection troubleshooting guide. If the box is online and the outdoor reading is still missing from the app, check the Y-cable.
Check the Y-cable if there is no reading
- Check that the Y-cable plug is fully seated in the control box. Switch off the heating system before changing any connections.
- Follow the cable from each connector. The branch marked with a tree should lead to the outdoor sensor. The branch marked with a house should lead to the heating system.
- Check all four connections on each connector. The four that arrived already connected may also have come loose. They are numbered 3, 4, 7 and 8 in the picture. A loose connection can sometimes cause the control box to click.
After making a change, switch the heating system back on and check the app for the outdoor reading. If it is still missing, the outdoor sensor or its cable may also need checking. If you are unsure about the connections, email support@ngenic.se with a photo.
Can you see a reading that seems wrong?
The app shows the measured outdoor temperature. Some heating systems display the temperature that Tune sends to control the heating, so the two readings can differ. See how to compare readings taken at the same time.
If the value in the app has looked wrong ever since installation or a heating system change, send support the make and model, a photo of the model label if available, and the reading you see. We can check whether the outdoor sensor type selected for your system is correct.